Search Site

22 GPM 2 Stage Log Splitter Gear Pump CBDN-16/7

RECOMMENDATIONS

Fluid Reservoir: 12 Gallons Minimum; 15-25 Gallon tank or cooling system recommended.
Use a 1-1/4 ID Suction Hose and 3/4" ID high pressure hoses.
Manufacturer states pump is not designed for use with “universal” or "tractor" hydraulic fluid. Only ISO 32 or ISO 46 fluid.
If a return filter is used, make sure flow rate is sufficient. A 50 GPM flow rate filter is recommended. Suction-side filtration should be no finer than 150 micron. Use of 10-25 micron filters on the suction side will cause failure. Make sure hydraulic fluid reservoir is not located below pump to ensure a sufficient flow of oil to the pump. Mounting the pump too far above the source of fluid will cause cavitation and damage the pump.
Check product description and dimensions to determine fit.

  • 22GPM @ 3,600 RPM
  • 5/8" Shaft w/ Keyway (0.625 inch) shaft
  • 1" NPT Inlet Port
  • 3/4 NPT Outlet Port
  • Maximum Pressure (PSI): 3000

SKU: 91-129-PUMP-22
PN: CBDN-16/7

Availability: In stock

$199.95
Product Description Specs Related Products Reviews Questions (0)

Back to top